How To Fix Windows 11 Installation Error Quickly?

Suppose that you were trying to install Windows 11 on your system but got stuck with an error screen. What will you do now? How to resolve that Windows 11 installation error? Do not panic as this blog will provide you with an easy and reliable solution to fix Windows 11 installation errors.

What triggers Windows 11 installation error?

Users reporting the Windows 11 installation error are constantly increasing in number. In line with that, it was of almost important to understand what is causing the installation issue. It was found that settings Secure Boot and TPM 2.0 should be enabled on the device on which you are installing Windows 11. It is good to consider them as a minimal requirement for installing Windows 11 on any PC. Do ensure that you are either fixing both these errors or at least one of them. So now, let's quickly step ahead with this basic understanding of Windows 11 installation errors.

Your system is unable to run Windows 11 successfully because of two reasons.

The error might be caused due to the Secure Boot feature in the BIOS setting of your PC which might be disabled at the time of installation.
Another thing to make sure of is the TPM 2.0 which should be enabled for your PC. This is one of the minimum requirements for Windows 11.

Commonly, both of the above errors are likely to occur when you are trying to mount the Windows 11 ISO and while running the installed file. Next, we are going to discuss the potential fix to wipe out Windows 11 installation errors on your PC.

My PC is unable to run Windows 11. What to do now?

Troubleshooting and fixing errors on Windows-based computers are quite simple which means you don't have to be a tech expert for performing any solution. Following are the easy steps listed to fix the Windows 11 installation error.

1. TPM 2.0 Support is a Must

Most of our users might not be aware of TPM functionality. Well, TPM is a microchip that authenticates your PC or laptop platform before installing Windows 11 ISO file. Ideally, your PC must have support for TPM 2.0. Therefore, in order to check whether TPM is enabled or not on your PC, execute the below steps.

Open the Run command prompt by pressing the key combination 'Windows + R'. You will see a dialogue window open up.
Now, enter the command 'tpm.msc' and click on the OK button. This triggers a window titled as 'TPM Management on Local Computer'.
Here, you can check whether the TPM has been enabled under the 'Status' section or not.
If you find the message as 'The TPM is ready for use', that means it is enabled. In that case, don't follow the next set of instructions.

If TPM is not enabled then go with the below sequence of steps.

Restart your PC or laptop.
Launch the 'Startup Menu' using F1, F2, F10, F11, DEL or other required key.
Now, under the 'Security Tab', go to 'TPM device'.
From the list available, choose the 'Available' option.
Save the configuration and restart your PC.

2. Enable Secure Boot for your PC

Before proceeding, ensure that the TPM setting is available.

Next, restart the PC and step into the 'Start Menu'.
Navigate to the 'Bios Setup' option.
Under the menu 'Advanced Tab', select the 'Boot Options'. Here, you will see a lot of boot options are available to choose.
Find 'Secure Boot' in those options and enable it.
Save the configuration and exit from the Start Menu.
Boot the system for a second time and step into 'Start Menu' again.
Pick the drive which contains the Windows 11 download in 'Boot Device Option'.
Lastly, manually install Windows 11 using the Windows 11 ISO file.

Is your system ready for installing Windows 11? A Quick Check

Before initiating the installation on our PC, it's essential to validate if your PC meets all the minimum requirements for Windows 11. What all it needs?

1.4 GHz single-core (32-bit) or a 1.4 GHz single-core (64-bit)
2GB of RAM
15GB of available storage
Minimum hardware resolution of 1024 x 768

Note: Some users have got the ISO images of the Windows 11 leaked version. But those who haven't can go with the ISO images of Windows 10 latest version.

Remember, installation troubles are common to every user nowadays which simply means that you are not alone in this trap. Following the right guide with patience is the only solution to run a successful installation. We hope that this blog guide is helpful for all Windows users to work out the Windows 11 installation error on their system.